Measure your insert, then pick the cover size that matches it, not the bed.
Cover measurements
| Size | Width × length | Fits an insert about |
|---|---|---|
| Twin | 68 × 88 in | 68 × 86 to 68 × 88 in |
| Twin XL | 68 × 92 in | 68 × 90 to 68 × 92 in |
| Queen | 88 × 88 in | 86 × 86 to 88 × 88 in |
| King | 104 × 88 in | 102 × 86 to 104 × 88 in |
Measurements come from the print partner's product specification. Pre-made covers can vary by up to 3 inches in either direction.
How to measure
- Lay your insert flat.
- Measure the short side (width) and the long side (length) in inches.
- Choose the cover whose measurements are equal to or up to 2 inches larger than the insert. A cover smaller than the insert will not zip.
Full/double inserts are usually 80 to 86 inches wide. A Queen cover is the closest fit; it will sit slightly loose.
What the cover is
- 100% polyester brushed microfiber.
- Design printed on the front panel by dye-sublimation. The back is plain.
- Invisible zipper along one side.
- Base fabric in White or Cream. Photos show White.
- No corner ties. If your insert shifts, use clip-on duvet grips.
Care
| Step | Setting |
|---|---|
| Wash | Machine wash cold, gentle cycle, cover turned inside out |
| Bleach | Do not bleach |
| Dry | Tumble dry low or no heat |
| Iron | Do not iron. Do not iron over the print |
| Dry clean | Do not dry clean |
Wash it before the first use to soften the fabric. Zip the cover closed before washing so the zipper does not catch.
Questions about fit: support@inspireprintglobalpte.online. Returns for a wrong size are covered in Returns and refunds.